Help and support
Pick your problem below. If it is not listed, email us at [email protected].
Connection
System requirements
- PC: Windows 10 or 11, 64-bit (x64), with the free Windows host app installed. It runs without administrator rights.
- Graphics: the video is encoded by the hardware video encoder of your graphics card or processor (for example NVIDIA, AMD or Intel) through Windows. Without one, a software encoder is used, which needs more CPU power.
- Android device: a tablet or phone with Android 8.0 or newer. Up to 4K / 120 fps depends on the video decoder of the device.
- Pen: pen pressure and tilt need a stylus that reports them to Android, Windows 10 version 1809 or newer, and a drawing app that supports Windows Ink.
- Connection: the same Wi-Fi or LAN, the hotspot of your phone or tablet, or a USB cable with USB tethering.
- Extended display (optional): the free Virtual Display Driver from the Windows setup, or an HDMI or DisplayPort dummy plug.
Windows SmartScreen or antivirus warns about the installer
- The Windows installer is not code-signed yet, so Windows SmartScreen can show Windows protected your PC for it. Select More info, then Run anyway.
- The warning appears because the installer has no code signature yet, not because a problem was found in it.
- Download the installer only from this website, canvexdisplay.com. Do not run copies from other sites.
- If your antivirus blocks it, check that the file came from this website. You can report it to your antivirus vendor as a false positive, or email us.
PC not found
- Make sure the PC app is running (look for the Canvex Display icon in the system tray).
- Confirm both devices are on the same network: the same Wi-Fi / LAN, your phone or tablet hotspot, or USB tethering.
- Try manual IP entry if automatic discovery shows nothing.
- Check that Windows Firewall is not blocking the PC app. The installer adds firewall rules for CanvexHost.exe on all network profiles; a copy started from another location needs its own rule.
Devices can't see each other on public or guest Wi-Fi
- Some networks, often guest networks in cafes or hotels, use client isolation, so devices on the same Wi-Fi cannot see each other. Many home, office and dorm networks work fine.
- If your network blocks it, connect with a USB cable and USB tethering, or turn on the hotspot of your phone or tablet and connect the PC to it.
USB connection not working
- Connect the USB cable, then turn on USB tethering in Android settings (usually under Network > Hotspot & tethering).
- Use a data-capable cable; some cables only charge.
- Reconnect the cable and wait a few seconds for Windows to set up the new network adapter, then search again.
Where is the pairing code?
- The 6-digit pairing code is shown on your PC in a tray notification from Canvex Display for Windows.
- If notifications are turned off or hidden, the code is also printed in the PC app console window.
- Codes are short-lived; if one expires, start pairing again from the Android app.
Is there a version for Mac, Linux or iPad?
Not at the moment. Canvex Display works with a Windows 10 or 11 PC and an Android tablet or phone. There is no version for macOS, Linux, iPad or iPhone.
Can I transfer files?
- No. Canvex Display does not transfer files between the PC and the tablet.
- Clipboard sync is included: what you copy on one device can be pasted on the other. You can turn it off from the tray menu of the Windows host app.
- To move files, use your usual tools, such as a cloud drive or a USB cable in file transfer mode.
Picture and sound
Connected but no image yet
- Wait a few seconds for startup recovery.
- Use Refresh picture from the session screen.
- Other screen capture tools (for example OBS or Teams) can compete for desktop capture; close them and try again.
The picture is blurry or pixelated
- Quality adapts to your connection: when the network is busy, the picture gets softer so the stream stays smooth. Move closer to the router, use 5 GHz Wi-Fi, or connect with a USB cable and USB tethering.
- In the Android app, choose Quality under Picture quality before you connect. It needs strong Wi-Fi or a USB connection.
- In the app Settings, check Resolution. A low resolution looks soft on a large tablet screen.
- If Compatibility decoding is on in the app settings, the maximum resolution is lower. Turn it off unless the picture looks corrupted without it.
- When mirroring, the tablet shows your PC monitor scaled to fit, so text can look softer than on the PC. Extended display uses a mode close to the resolution of the tablet.
Session feels degraded
- Reduce quality or resolution settings.
- Move closer to the router, use 5 GHz Wi-Fi, or use a cleaner Wi-Fi environment.
- Try a USB cable with USB tethering for the most stable connection.
Setting up extended display
- By default the PC app mirrors an existing monitor. Extended display needs one more display output on the PC.
- Easiest: re-run the Windows setup and tick Extended display driver (Virtual Display Driver, MIT). You can also install the Virtual Display Driver yourself with the VDD Control app.
- Alternatively, plug an HDMI or DisplayPort dummy plug into your graphics card.
- Then enable Extended display from the PC app's tray menu and start a session. The virtual monitor is attached while streaming and detached again when the session ends.
Audio is unavailable
- Some PC configurations may not provide usable audio.
- If audio is unsupported on the current PC, the app may disable it automatically.
- Check that the PC has an active playback device and that the Android media volume is up.
Pen and drawing apps
Pen pressure in drawing apps
Canvex Display sends your stylus to Windows as a Windows Ink pen. It does not install a Wintab tablet driver. Apps that use Windows Ink get pen pressure and tilt; apps that support only Wintab get no pressure from Canvex Display.
Pressure not working?
- Set the drawing app to use Windows Ink. The settings for common apps are listed below.
- Restart the app after you change its tablet setting.
- Check that the brush or tool you use reacts to pen pressure.
- In the Android app, open Pen settings and look at the Pressure curve. Draw in Try it to check that your stylus reports pressure, and choose the curve that feels right.
- If the drawing app runs as administrator, Windows blocks the pen input. See "Can't control some windows" below.
- Windows has its own pen options in Settings > Bluetooth & devices > Pen & Windows Ink (Windows 10: Settings > Devices > Pen & Windows Ink), for example which hand you write with.
Settings for common apps
- Krita
- Settings > Configure Krita > Tablet Settings, then set Tablet Input API to Windows 8+ Pointer Input.
- Clip Studio Paint
- File > Preferences > Tablet, then set Using tablet service to TabletPC.
- Adobe Photoshop
- Photoshop uses Windows Ink by default on Windows. If you added the line
UseSystemStylus 0to aPSUserConfig.txtfile, remove it: that line switches Photoshop to Wintab. For pressure, open Window > Brush Settings, select Shape Dynamics and set Control to Pen Pressure. - Blender
- Edit > Preferences > Input, then under Tablet set Tablet API to Windows Ink. You may need to restart Blender.
- GIMP
- GIMP 2.10.38 or newer: Edit > Preferences > Input Devices, then set Pointer Input API to Windows Ink.
- Paint.NET
- Paint.NET 5.0 or newer gets pen pressure through Windows Ink, with nothing to switch. Check that Pressure Sensitivity is on in the tool bar.
- Affinity Photo 2, Designer 2, Publisher 2
- Edit > Settings > Tools, then set Tablet input method to Windows Ink.
- Sketchbook Pro
- Edit > Preferences > Brush, then set Tablet API to Windows Pointer and restart Sketchbook Pro.
- Microsoft OneNote
- File > Options > Advanced, then under Pen turn on Use pen pressure sensitivity.
These settings follow the documentation of each app. Menu names can differ between versions and languages. For other apps, look for a tablet or pen setting named Windows Ink, Windows Pointer or TabletPC.
Using it with a Wacom or other graphics tablet
- Canvex Display does not install a tablet driver and does not change the driver of your graphics tablet. It sends the stylus of your Android device to Windows as a Windows Ink pen.
- A drawing app set to Wintab gets pressure only from the graphics tablet. For pressure from Canvex Display, set the app to Windows Ink. Many graphics tablet drivers also have a Windows Ink option; see the tablet maker's instructions.
- If your graphics tablet works better with Wintab, switch the drawing app back to Wintab while you use the graphics tablet.
- To rule Canvex Display out, exit the Windows host app from the tray and try your graphics tablet again. If it still does not work, update or reinstall its driver from the manufacturer's website.
Keyboard shortcuts and the shortcut palette
- During a session, open the session controls and tap Show shortcuts to show the shortcut palette on the tablet.
- Choose a preset for your app: General, Photoshop, Krita, Clip Studio Paint or Blender. With Edit shortcuts you can add, remove and change buttons; they are saved for each preset on the device.
- Hold a key to press it, or tap it to lock it down, for example Ctrl or Space while you draw.
- In Pen settings, each pen button can do a right click, a middle click, switch to the eraser, or send a keyboard shortcut.
- To type text, tap Show keyboard in the session controls.
Can't control some windows
- Windows blocks input from normal apps into windows running as administrator (for example Task Manager).
- To control them, exit the PC app from the tray and start CanvexHost.exe with Run as administrator. UAC prompts cannot be controlled remotely.
Purchase and trial
Trial and purchase
- Every feature is free for 7 days. After the trial, Canvex Display is a one-time Google Play purchase that includes everything: extended display, pen pressure and tilt, Wi-Fi and USB connections, and up to 4K / 120 fps on supported devices. Actual results depend on the video decoder of your Android device, your PC, and your network, and the app automatically falls back to a supported mode. There is no subscription, no ads and no account.
- If your purchase is not recognized, make sure you are signed in with the Google account you used to buy it, then tap Restore Purchases in the app.
- The app works offline using the last known purchase state. Refund requests are handled by Google Play.
Does one purchase work on my other Android devices?
Yes, on devices that use the same Google account. The purchase belongs to the Google account you bought it with. Install Canvex Display on the other device from Google Play with that account and tap Restore Purchases. Google Play purchases cannot be moved to a different Google account.
For advanced users
Canvex Display can't start (reserved network ports)
Windows features like Hyper-V, WSL2 and Docker reserve blocks of network ports at startup. If those blocks include the ports Canvex Display uses (TCP 9430, UDP 9431 and 9432), the PC app switches automatically to another port (for example 19430) and your tablet still finds the PC.
If no port is free, the settings window shows Canvex Display can't start.
How to check
Run this command in a terminal to list the port ranges Windows has reserved:
netsh int ipv4 show excludedportrange protocol=tcpHow to fix
Open a terminal with Run as administrator and run these commands in order:
net stop winnatnetsh int ipv4 add excludedportrange protocol=tcp startport=9430 numberofports=1netsh int ipv4 add excludedportrange protocol=udp startport=9431 numberofports=2net start winnat- Then start Canvex Display again.
- Stopping
winnatbriefly interrupts Docker and WSL networking. - Setup also tries to reserve these ports for you.
- If you connect manually, use the port shown next to the IP address in the Canvex Display window.