Use your Android tablet as a wired second monitor over USB

Updated by MTG Softworks

Wi-Fi works well at home, but a cable is often more predictable: no interference from other networks, no router in between, and it also works on guest networks that keep devices apart (client isolation). Canvex Display can run over a USB cable using Android's built-in USB tethering.

How the USB connection works

Canvex Display does not use a special USB mode, ADB or developer options. When you turn on USB tethering, Android creates a small private network over the cable and Windows sets it up as a new network adapter. The PC app and the Android app then talk over that network exactly as they would over Wi-Fi, with the same pairing and encryption.

  • Steady latency and bandwidth, independent of your Wi-Fi.
  • Works where Wi-Fi client isolation blocks devices from seeing each other.
  • Mirroring, extended display, touch, pen, audio and clipboard all work the same as over Wi-Fi.

Set up a wired connection

  1. Install the PC app and the Android app

    Install Canvex Display for Windows on your Windows 10/11 PC and the app from Google Play on your tablet or phone (Android 8.0 or newer).

  2. Connect a data-capable USB cable

    Plug the tablet into the PC. Use a cable that carries data, because some cables only charge.

  3. Turn on USB tethering

    On Android, open Settings and turn on USB tethering. It is usually under Network & internet > Hotspot & tethering (the exact menu names vary by manufacturer).

  4. Give Windows a few seconds

    Windows installs the new network adapter automatically. Wait a few seconds, then open the Canvex Display app. The PC appears in the list. If it does not, search again.

  5. Pair and start the session

    Enter the 6-digit pairing code shown on the PC, then tap Start Session. To use the tablet as an extended monitor rather than a mirror, enable Extended display in the tray menu first (see the second monitor guide).

Things to know

  • While USB tethering is on, Android also shares its own internet connection with the PC, and Windows may route some traffic through it. If your phone or tablet uses a limited mobile data plan, keep an eye on data usage or turn off mobile data on the device.
  • Some phones turn USB tethering off when the cable is unplugged; turn it on again after reconnecting.
  • Some devices or carrier settings hide the USB tethering option. In that case, use the device's Wi-Fi hotspot or a shared Wi-Fi network instead.
  • Every feature works over USB, including extended display and pen pressure and tilt. Try everything free for 7 days, then buy Canvex Display once (see pricing).

Troubleshooting

  • The PC does not appear: check that USB tethering is still on, try another cable or USB port, and wait a few seconds for Windows to set up the adapter before searching again. You can also enter the PC's IP address manually.
  • Windows Firewall: the installer adds rules for CanvexHost.exe on all network profiles. A copy started from another folder needs its own rule.
  • The picture stutters: lower the quality or resolution in the app, and close other screen capture tools on the PC.

See the help page for more help.

Get both apps

The free Windows host app goes on your PC, the Android app on your tablet or phone. Every feature is free for 7 days.

Download Windows host app
  • Version 1.3.54.1 MBReleased Nov 16, 2026
  • Windows 10 and 11, 64-bitFree host app
  • No driver needed to mirror a screen
  • SHA-256 3eafce910b4f813a1a63bfc24cb0218a521acd6b7a44c75ea930bea55805e309
Get it on Google Play

Related guides